21.5 more Apartments, and 0.5 Offices

The Elmhurst and Riverview Towers


The Mayflower and Park Place


Illuminada I & II


The Wimbledon, B&H Tower and Shaughnessy House


Hudson House, The Hargate and Prominence Place


Hyde Park, The Berkeley and The Albany


Centurion Towers and Oak Tower


Oliver Place, Oakwood Towers and the Mountbatten


Park Plaza, Oxbridge Place & The Carlton

In this batch of models the 0.5 of an office and an apartment is Park Plaza, which has 6 floors of residential above 10 floors of office. As far as I know, it is the only building of that type in Edmonton. (It also shouldn't be confused with Park Square, Park Place, Park Tower, Parkside Tower, or Central Park).

Also in this group is the Wimbledon, which I would have to say is by far the most phallic building in Edmonton especially when viewed from Jasper Avenue. Something like that doesn't just happen by accident, does it?

Beyond that, these models are mostly interesting because they largely "complete" the skyline of Oliver. There are still a few office buildings to do around 112 Street, and a few more apartments that I just happened to miss when I was taking photos, but this is basically it.

30 Apartments and 1 Office

I don't particularly like modeling apartment buildings, but occasionally I'm hit with a need for completeness. This set has a few buildings in the McKay Avenue area, along with a lot in southeast Oliver and Grandin. Previously I hadn't done anything in that area, but this should fill it in nicely.


Hillside Estates North & South, Dunedin House and McDougall Place


Grandin Green and the David Thompson


Park Towers, the Panorama and the Edgehill


Central Park, the Trethway, Dorchester House & Maureen Manor


Valhalla and Victoria Park Tower


York House, Bondell Tower, Lancaster House & the DeVille


Academy Place and Windsor Arms


Capital Place, Tower on the Park and Grandin Manor


Westwind Estates and Le Jardin


Tegler Manor, Rosedale Place, Westcliffe Arms and Grandin Towers


Cathedral Court

Apartment buildings are a really great way to learn how to do photereferenced models in Sketchup. If you're interested in taking a crack at modeling they are the absolute best place to start because apartment buildings are impossible to screw up.

In the same way that they are impossible to screw up they are also almost impossible to do really well. There are three or four different ways to model balconies (all on display here), and none of them are good. With a model like the Baker Clinic, QE II Planetarium or SAGE you can strip away the questionable additions, the neglect, and the urban clutter to reveal the hidden intent. With an apartment building there's nothing hidden - it's a box; or in this case many, many boxes. Apartments get pretty boring once the initial learning is over.

Probably the most interesting thing about these models is seeing "families" of buildings pop up. There are the obvious ones like Hillside Estates North and South; and the more recent Grandin Manor, Grand Central Manor, Lord Strathcona Manor, etc.  There are also:

The David Thompson and Capital Centre
The Edgehill and Victoria Park Towers
Maureen Manor, York House, Academy Place, Windsor Arms and several more I haven't gotten to.
Grandin Towers and Jasper House
Le Jardin, Jasper 111 and Rocky Mountain Court in Calgary

Shaw Conference Centre

Model and Building information

The Shaw Conference Centre is probably the last major building in downtown Edmonton that I hadn't modeled. That depends how you count, of course - First Presbyterian is definitely significant; and the Baccarat casino is...well it's downtown; and there are a lot of apartment buildings that aren't done. But when people think of prominent buildings in Edmonton the Shaw is probably near the top of the list, and it took me a long time to get to it.

There are a few reasons for that.

Firstly, the building annoys me. It must be one of the world's nicest escalator showcases, which isn't much of an accomplishment at all. I've used the stairs and escalators in the Shaw many times, but I can't say that I have ever stopped to marvel at the natural beauty outside of its atrium windows. Why not? Well, it's probably because I'm either concentrating on not falling down the stairs, or because stopping and marveling from an escalator is not an option. In either case when I'm in the atrium I'm likely preoccupied with getting to wherever it is that I'm actually going. Circulation and the simultaneous appreciation of sweeping vistas do not mix.

So the addition of Hall D finally - after more than 20 years - provided the Shaw with a room with a view. Problem solved. Except that it was solved by building a 200' long wall along a section of prime, rivervalley Jasper Avenue. It doesn't matter how that 200' wall has been dressed up with slogans and public art, it's an elevation that belongs on the back of a Safeway somewhere and not on Edmonton's main street.

The Shaw is obviously a challenging site, and I'm sure (or at least I hope) that those constraints led to the design decisions that were made. But yeah, there's some bitterness there.

The second reason it took so long to make the model is because it's hard to get a good picture of the Shaw. The best location that I know of is on some trails that are just west of Rafter's landing. I bike through there all the time, but my rides are not without injury or risk, so it was a matter of being down there with a camera. Even from the location though, parts of the Shaw are obscured by trees and the terrain.

And speaking of terrain, the final reason that this model took so long is because Google's terrain in the area is very incorrect. In Google Earth the whole lower terrace of the model is hidden by the ground, along with much of the second terrace. This was a compromise, because the only way that I could get any of the terraces to show up was by raising the whole model up by nearly 25'. That transforms Wall D on Jasper Avenue from awful to comical, and if I had raised the building enough so that all the terraces were visible then it would have just been ridiculous.

The model is interesting though, because the Shaw isn't a building that I ever really think of as a building. The terracing and the concrete really do meld into the surrounding landscape, so it appears as a collection of disconnected bits. It's nice to see how the whole thing fits together.

(The atrium is also not as tall as it probably should be, but I'm just going to pretend I didn't notice that.)

TELUS World of Science - Edmonton

Model and Building information

The Space Sciences Centre with its early additions was certainly one of Edmonton's most unique structures. And then the latter addition went and turned it into a Spaceship towing a minimall.

Regardless, the model turned out well, although after it was nearly finished I realized that I had made a fairly major mistake. As you walk counterclockwise around the building from the south to the north, the elevation of the terrain increases significantly. The building matches this by having each of the radial segments slope up a few degrees, so that from the front to the back you gain 10 to 15'. It is similar to Wright's famous sloped galleries in the Guggenheim, although here the effect is less apparent.

The model doesn't have that sprial - partly because it would have made a complicated and polygon-heavy model significantly more complicated, partly because Google Earth doesn't actually include that change in terrain, and partly because I didn't think that anyone would notice.

Brownlee Building and IBM Building

Model and Building information

The Brownlee building is just a really, really fat building. And although I normally like pilotis, the huge wings of this building and their closeness to the ground are just so heavy. The roundness, and the tiering, and the strange stepped detail on the front all contribute to making it feel like the whole building is being yanked down by gravity, with only the columns holding it up. That might have been the intention, but I'm not a fan. The actual pattern of the glazing and spandrels is quite attractive and interesting though.

I've heard that the architect of the Brownlee building was the same one who designed the IBM building at 44 Capital Boulevard. My Brownlee Building model is much, much better than my earlier model of the IBM building:


Model and Building information

The Glenora

Building Information:

12319 Jasper Avenue NW, Edmonton, Alberta
Built in 1989, 17 stories, 56m/180', 6000sqft floorplate

Model Commentary:

This was my third model, and as with my other early models I would like to retexture it one day. It does have interesting geometry though, and it was definitely the most complicated of my early attempts.

The Gainsborough

Building Information:

10011 123 Street NW, Edmonton, Alberta
Built in 1981, 23 stories, 70m/230' tall, 6000sqft floorplate

Model Commentary:

The Gainsborough was the second model that I made, and it is one of a half-dozen that are from the weekend when I first started to play with Sketchup. Those early models were all of buildings in the Oliver area; which is where I live. Initially I had intended to focus on Oliver, but that quickly changed and I moved on to modeling the larger downtown area.

Starting in Oliver was a good though, because the early models were a learning experience. This shows in these models - particularly in their textures - and one day I hope to go back to update them.